1/10pcs 3D Decorative Tile Stickers, Self-adhesive 3D Wall Stickers for Kitchen and Bathroom, Water Mold Resistant, 30x30cm

Description

Product Feature

• Stunning 3D Embossed Texture: Realistic 3D surfaces perfectly simulate various real decorative tiles and are lightweight and flexible.

• Premium Quality: Made of eco-friendly materials, no dioxins. Resistant to water and heat, no color fading.

• Stronger Upgraded Adhesive: Stick firmly to the smooth & clean surface and available on lightly textured walls.

• Fast and Easy Installation: Just peel and stick! No grout, no cement, and no mess! Easy cut with the utility knife or the scissors. Perfect for a wall decor DIY project.

• Widely Applicable: Living Room, TV Wall, Bedroom, Kitchen, Bathroom, Laundry Room, Hallway, Office, RV/Camper, et.

Product Detail

• Primary Material:PVC

• Surface Type: Matte

• Water Resistant: Yes

• Heat Resistant: Yes

*Our product pictures are actual pictures. Photography on this page is for representation only. Please note that the tile photographed may appear to have a slightly different hue on a screen due to screen resolution, color settings, and a variety of other factors.

*Purchase Enough Tiles at A Time. Please consider 10% cutting loss and purchase enough tiles at a time to make sure they come from the same batch to avoid slight color difference.

What‘s Include

• 1/10 Sheets Per Pack

• 9.7 Square Feet/ 0.9 ㎡ for 10 sheets

• 11.8 Inches x 11.8 Inches x 0.1 Inches/ 30 cm x 30 cm x 0.3 cm Per Sheet

Easy Installation

• Step 1– Thoroughly clean and dry your wall.

*Tips: If your walls are freshly painted, wait up to three weeks before applying tiles.

• Step 2– Plan where you want to install and cut the size accordingly to better fit the wall.

• Step 3– Peel off the backing and stick side by side for a seamless appearance.

• Step 4– Firmly once you are certain of placement with a plastic smoother to ensure best possible adhesion, especially the grout lines or the most concave area of the tile surface.

IMPORTANT TIPS

• Typically the backing adhesive will complete the bond to the wall within 48 hours. After 24 hours of installation, Press the grout lines firmly again to ensure more perfect adhesion.

• Our adhesive tiles can be placed on all clean and sleek surfaces. They are not suitable for outdoor settings or on the floor.

• If you want to remove the tile, use a heat gun or a blow dryer to warm up the glue and pull softly starting with the corners, that won’t damage the wall.

• In long-lasting usage, we recommend keeping 12 inches or 30 cm away from the center of the stove and fireplace.

• We do not recommend installing our 3D Wall Decor Tiles in your shower since they will be in direct contact with water.